Economy Set - Coat & Care Starter

easy-clean coating kit:

In 2 steps* to more free time through invisible protection with radiant shine, cleanliness and hygiene for your bathroom.

Apply activator to the sponge and spread thinly over the surface in circular movements. Allow to dry and polish with the blue cloth.

Apply the coating to the white cloth and rub the surface in circular motions. Allow to dry and polish with the green cloth.

And now a good surface has become a better surface. The coating is already functional, but for the best possible durability it should not be subjected to heavy use or cleaning for around 24 hours. After that, a long-lasting and very durable coating is achieved.

*Repeat the process if necessary to avoid defects

Download care instructions (multilingual):

Cleaning and care instructions easy clean

Do not use on:
Acid-sensitive surfaces, marble/natural stone, decorative tiles, enamel, etc. If in doubt, carry out a test on an inconspicuous area.

Contents:
1 sponge with handle formation
1 microfiber cloth blue
1 microfiber cloth green
2 white viscose application cloths
100ml pre-cleaner
100ml coating
1 pair of disposable gloves

SaniClean & Pearl 250ml:

CLEANING
Spray on, rub in with a cloth and allow to take effect for approx. 1 - 2 minutes. Rinse thoroughly or wipe with a damp cloth. Repeat process if necessary. When used regularly, it creates a water-repellent protective film that also makes cleaning easier and minimizes the effort.

easy-clean coating kit:

Hygiene and sparkling cleanliness without much effort and for at least 4 years*!

This special BTTR4® coating eliminates the need for expensive and aggressive cleaning agents.

In addition to the cost and time savings in daily cleaning, the coating also makes an additional, valuable contribution to the environment!

With this BTTR4® premium product you protect your sanitary facilities from heavy limescale and dirt deposits as well as premature aging.

Uncoated surfaces would soon look unsightly due to dirt, soap, lime and mineral deposits and would therefore have to be replaced much sooner.

Blind, stained glass showers or dull sanitary ceramics are now a permanent** thing of the past with this coating.

* When cleaned and cared for properly, used in a normal household, in combination with a standard shower squeegee or the special cloth for removing water drops that have not completely drained away.

** With regular use of the additional cleaning and care products (Saniclean&pearl) you create a long-lasting function.

SaniClean & Pearl 250ml:

CARE
For surfaces that are already clean, simply spray and rub in; if necessary, polish with a dry BTTR4® cloth. For mild and caring cleaning of glass or polystyrene showers, wash basins, fittings, wall tiles, taps, shower heads, toilets, kitchen sinks, etc. Wet cement joints before cleaning. Do not use on natural stone such as marble, limestone, terracotta, enamel, acid-sensitive metals, lime joints, carpets or textiles.

easy-clean coating kit:

When the BTTR4® easyclean COATING KIT is used correctly
Easier cleaning of your glass shower is guaranteed for at least 4 years!

With regular use of the complementary BTTR4® cleaning and care products, you will have a long-lasting function – for the lifetime of your shower.

SaniClean & Pearl 250ml

DANGER
Flammable liquid and vapor. Causes serious eye irritation. Do not breathe vapor/spray. If medical advice is needed, have container or label at hand. Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. Dispose of contents/container in accordance with local/national regulations.

Saniclean & Pearl

*UN 1987, Class 3, Packing Group III, Alcohols nos (Isopropanol solution)*

UFI code: WAH5-RXUJ-JV2G-Q498

Customs tariff number: 34023990

VOC content: 23%